2019 Laser Remove Tattoo Eyebrow Removable Tattoo Black Face Doll Eyebrow Machine Q Switched nd Yag Laser Tattoo

2019 Laser Remove Tattoo Eyebrow Removable Tattoo Black Face Doll Eyebrow Machine Q Switched nd Yag Laser Tattoo

This product is currently out of stock and unavailable.

Compare
SKU: 4000112987920 Category:

Description

2019 Laser Remove Tattoo Eyebrow Removable Tattoo Black Face Doll Eyebrow Machine Q Switched nd Yag Laser Tattoo
If you need toner, please buy it separately
Buyers notice:
1. Before purchasing the instrument, please understand the customs policy of the receiving country. If the product cannot be cleared due to customs policy, the buyer shall bear the responsibility!
2. Paying customs duties is the responsibility and obligation of every citizen. Please pay attention to the logistics information of the parcel after the goods are issued, and cooperate with the customs clearance. We will refuse to accept refunds due to the buyer’s unwillingness to bear the tariff. Disputes, if the buyer does not cooperate with the customs clearance, the goods caused by the non-payment of customs duties are destroyed, the responsibility is borne by the buyer!
<span style="max-width: 100%;font-size: 20px"><span style="font-weight: 700 !important">You must fill up the water before use, then connect the power to the power! Otherwise the machine will be burned out</span> <span style="font-weight: 700 !important">! ! !</span></span>







<span style="font-weight: 700 !important"><span style="max-width: 100%;font-size: 18px">How to operate:</span></span>



<span style="font-size: 16px">1. Remove the rubber stopper.</span>



<span style="font-size: 16px">2. Connect the handle to the machine.</span>



<span style="font-size: 16px">3. Select the probe you need (1064nm/532nm or black-faced doll) and hang the handle on the bracket.</span>



<span style="font-size: 16px">4. Insert the key.</span>



<span style="font-size: 16px">5. Open the water inlet to keep the air circulation inside the instrument.</span>



<span style="font-size: 16px">6. Connect the hose to the water inlet and connect the funnel.</span>



<span style="font-size: 16px">7. Open the overflow.</span>



<span style="font-size: 16px">8. Add water (3L-4L distilled water or purified water), wait until the overflow is continuous, indicating that the water is full, then stop adding water.</span>



<span style="font-size: 16px">9. Wait until there is no overflow screw on the overflow.</span>



<span style="font-size: 16px">10. Connect power and foot switch.</span>



<span style="font-size: 16px">11. Twist the switch to the right waiting to bounce up.</span>



<span style="font-size: 16px">12. Turn the key to turn on the machine.</span>







<span style="font-size: 20px"><strong><span>Note:</span></strong></span>



<span style="font-size: 16px"><span>1.Please install and hang the handle first, then add water, otherwise the handle and the bottom of the machine will leak.</span></span>



<span style="font-size: 16px"><span>2.Step on the foot pedal Control the handle light. Release the foot pedal to stop the light.</span></span>



<span style="font-size: 16px"><span>3.Please read the instruction manual carefully before operating the instrument, and use it after the operation steps. The distance between the skin and the skin is 2-3cm. Please apply it to the face after skilled operation, otherwise it will be dangerous.</span></span>
Points for attention before and after tattooing:
1. Tattoos less than a year, do not recommend washing, the effect will not be ideal
2. Wash tattoos can bear to do not apply anesthetic, use anesthetic easy to proliferate, wash if burning feeling is very strong, can apply repair ointment and ice apply for 5 minutes
3. Wash the skin with more than 75% medical alcohol before washing, because there is cutin and dirt on the skin, so it is not easy to infect after washing.
4. After finishing the tattoos for about 2 days, it will form a knot. Keep in mind that water can not be touched before the knot is finished. It must be natural to fall off. It is not allowed to drop by hand.
5. Avoid sun exposure and sweat after washing. Fast spicy food, dark food such as soy sauce
6. After washing the lines, you can choose to take oral anti-inflammatory drugs for 3 days and use repair products for external use to assist the metabolism of the skin.
7.With the black face doll function, about 1 face 4 faces need to clean the black face doll
lens
8. The recommended interval between two tattoos is 45 / 60 days
9. Tattoos are not recommended in the following cases:
* scar physique can not do laser tattoos;
* coagulopathy, hypoimmunity, chronic wasting disease, systemic or local infection of the focal point;
* Photographer;
* careful use of all kinds of mental and psychological disorders and endocrine dysfunction;
* Lupus erythematosus, vitiligo during the progressive period and within 1 month of the use of hormones, salicylin, photosensitive drugs carefully used
Skill of tattooing operation:
A. 1064nm (short head) bald head used to remove blue, black, green pigment sink.
B. 532nm (long head) skinhead is used to remove red, coffee, brown pigmentation.
c. During the treatment, the operator holds the handle of the laser gun to form a 90 degree right angle with the treatment site as much as possible. To ensure the vertical light of the laser and reduce the loss of laser energy: eyebrow washing, eyeliner, lip line, light spot should be superimposed and translated to form a straight line washing. Small area is taken for treatment. Each treatment is a small part. It is required to achieve bleeding phenomenon in this part.
<span style="max-width: 100%;font-size: 20px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif"><span style="max-width: 100%"> Determination of the difficulty of removing the pigment:</span></span></span>



<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif">1.The texture of embroidery color material is good or bad, the color material is divided into plant color material, compound color defense, chemical color material. It is easy to dispel from easy to difficult. Usually, the compound color material and the chemical color material contain iron, and the lead ore material is easy to sink in the deep layer of the skin, which brings difficulties to the treatment.</span></span>



<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif">2. The depth of the pattern. In general, the color depth is difficult to remove, the number of treatment is more, the color is shallow, the difficulty is small, and the number of treatment is small. However, the treatment effect is not ideal regardless of the depth of the eyebrow of the chemical color family.</span></span>



<span style="max-width: 100%;font-size: 16px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif">3. Individual physical differences. This includes age, skin quality, physical immunity and other factors.</span></span>







<span style="max-width: 100%;font-size: 20px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif"><span style="max-width: 100%">Points for attention after operation:</span></span></span>

operating conditions:

1. ambient temperature 15 ℃-30 ℃

2.relative humidity 70%

3. Atmospheric pressure 860-1060hpa

4.using single-phase power supply 220V ≤ 10%, 10A

Operation mode: intermittent loading continuous operation mode, each continuous output 5000 pulse intermittent 10 minutes is suitable.

Cooling mode: air cooling and water circulation cooling.

Power allocation:

Power supply: single-phase 220V / 10% 50Hz / 2% 10A

Note: the power cord of this instrument is equipped with standard three-core national standard plug, confirm that your power outlet has protective ground wire, and ensure reliable grounding. This instrument uses a power range of 200 V ≤ 240 V, if the ground electricity is used. Beyond this range, please use a voltage regulator. The power of the regulator is 300W.

Method of operation:

1. add pure water with a funnel. Please fill up the water before starting the machine, (about 3L), the overflow will be unscrewed until the overflow is filled with water. When the water is used for the first time, the water inlet is open.

2. according to the treatment needs selected from the laser wavelength, install 1064nm or 532nm wavelength output treatment operator.

3. Startup operation:

let the emergency stop and close in the lifting position.

The energy adjustment is within three seconds of pressing the subtraction key first, and pressing the add and subtract key can increase or decrease the energy level.

Frequency adjustment within three seconds of pressing the key, pressing the add and subtract key can increase or reduce the frequency of light.

Prompt information and test items

Working switch (handle or pedal) prompt, that is, when the working switch is closed, press the pre-ignition key, which is not allowed by the system safety, so please disconnect the working switch and press the pre-ignition key.

Temperature is too high, at this time the water temperature is too high, please keep the instrument standby for 10 minutes, and put half the water, add half the water to continue to work.

The use of 532NM converters:

Unscrew the sight sight 1064NM of the handle, install the 532NM converter, and the other operation methods are the same

Disinfectant: After each treatment and after treatment, use gauze or cotton swab in 75% of the medical alcohol to wipe the lens for 1-2 times in the aiming head.

Maintenance and maintenance:

1. brief maintenance: clean the output lens: there is an output lens inside the sight. It is recommended that every treatment be completed to check whether there is a splash attachment on the surface of the lens. If so, please turn the handle head vertically down and unscrew the sight. Gently wipe the lens with cotton swabs or lens paper dipped in anhydrous ethanol. Replacement of cooling water: generally used for 15 working days, in the shutdown state, the cooling water in the machine will be discharged, and pure water will be added again.

<span style="max-width: 100%;font-size: 20px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif"><span style="max-width: 100%"> Operation introduction of all kinds of cases:</span></span></span>

1. 1 dispel monochromatic blue, black eyebrow:

The recipient should not open his eyes during the operation. The operator selected the required laser dose according to the depth of the affected area (adjusting the appropriate value of energy) and moved slowly from the normal skin near the affected area with a laser gun, so that the patient had a psychological acceptance process. At this time, the light speed can be set to 5HZ gun head from the affected place 1 ≤ 2 finger distance for treatment, from the eyebrow or eyebrow tail treatment can be done, 5-10 minutes after operation if there is reverse color phenomenon, can be washed again. At this time, compared with the first time, the energy is increased by 2-4 values, and the gun head is raised and the distance between the two fingers and three fingers is treated to further crush the pigment and promote the absorption of the body. After the month, the second treatment can be carried out by the non-donor of the coloring material.

1.2 removing and covering eyebrows (covering eyebrows need to be treated 2 times 3 times can be completely removed)

The light speed can be set at 3Hz, and the appropriate energy value can be compared with the above table. 1.064nm bald head was used to treat it, and the distance between gun head and skin was 2 ≤ 3 fingers, and then 532nm bald head was used for treatment. Because brown color belongs to color mixture, it usually needs to be treated more than twice, the interval of treatment is 45 × 90 days, and the treatment bald head is selected according to the color left behind during the second treatment.

2 eyeliner washing

The light velocity can be set to 5 Hz, and the energy value of the light can be set to the lowest (critical light point). The distance between the gun head and the affected place is 2 times 3 fingers, depending on the bright spot of the eye! The operator must use thick medical gauze or eyelid plate to closely protect the eyeball. First wash the eyeliner, ask the subject to close his eyes, at the same time, the eye looks up, the operator presses the upper eyelid with the gauze with his index finger, and pushes the upper eyelid upward, and the lower limit line of the middle finger is peeled off and the lower limit line is exposed and treated with the speed of light for 5Hz: then wash the upper limit line, The subject closed his eyes and looked down at the same time. The operator pressed the eyelids down with the gauze of the middle finger, and pushed the upper eyelids up to reveal the upper eyes. The line was treated with 5Hz at the speed of light.

3 lip wash line

The light velocity can be set to 5Hz, the appropriate energy value can be referred to the above table, and the distance between the gun head and the affected place can be 3 ≤ 4 fingers. Remove black, coffee, crimson, brown first with 1 064nm light hair, and then with 532nm light hair twice: remove light tone color, red, light coffee color, light brown with 532nm light hair wash.

Note: all lip lines, lip floats, lip dipping must be treated half a year after floatation, otherwise the operation fails. The course of treatment was 45 min 60 days, cycle treatment until washed.

4 wash tattoos

The light exit speed can be set to 3 HZ/ 5HZ, and the energy appropriate value is referred to above. The tip of the gun head is 3-4 from the affected part, and can be treated with the near-focus high energy as much as possible, and the effect of the bleeding point is especially good. The common blue-black removal is selected for the treatment of the 1064 nm optical head. In case of red, the brown color is selected for 532 optical head treatment, and the period of treatment is 45-90 days, and the cycle treatment is until the cleaning is performed.

5-spot nevus

Set the light speed to 3Hz ≤ 5Hz, refer to the table above, the gun head is 3 times 4 fingers away from the affected area, and treat it as much as possible with a high energy value close to the focal point. The effect is especially good, except red pigmentation is directly treated with 532nm bald head. 1064nm brushing is recommended for the treatment of nevus. If the treatment of dark macula is ineffective, 532nm brushing can be used. The interval of treatment was 15 × 30 days, and the cycle was treated until washed.

6 birthmark, nevus of Ota

The light-emitting speed can be set to 3 Hz/5 Hz, the energy appropriate value is referred to above, and the head distance to the affected part 3-4 refers to treatment with a high-energy value close to the focus as much as possible. If the dark mole treatment is not valid, a 532 nm head wash may be used. The treatment course interval is 45-90 days, and the cycle treatment is until the cleaning is performed.

intraoperative reflection and postoperative recovery:

As a result of laser transient high energy irradiation, the chromatin mass of the diseased tissue is rapidly cracked into fine particles that can be swallowed by macrophages in the human body, and a part of the superficial epidermis is immediately ejected from the body. The other part of the deep tissue was evenly arranged to the epidermis, so the grain color recovered within a short period of time after operation. In the treatment of deep striated tissue, due to the strong absorption of laser energy by melanin, local redness and swelling, blisters and even bleeding at the bleeding point may occur, all of which belong to the normal inflammatory reflection of the tissue. However, the severity of local inflammation varies from person to person. Touch the tissue after inflammation relief may appear itching, and the tissue has a hard feeling. . In general, all non-electric feelings will disappear within 3 or 7 days after adoption, and individual people will last for a longer period of 1 to 3 months because of their physique.

After the operation, the bleeding area was affected by hair, washing, exposure and other infection behaviors, and according to the doctor's advice, the food regulation was not allowed to eat hot food within 37 days or drink. In the case of sensitive customers with more bleeding and severe swelling, we recommend that they use erythromycin ointment outside the postoperative oral antibiotic(acetylspiromycin)and recovery period(72 hours after operation)to help heal, or wipe the repair solution.

1.The determining factors of the difficulty of removing pigment.

(1).The texture of embroidery color material is good or bad, the color material is divided into plant color material, compound color defense, chemical color material. It is easy to dispel from easy to difficult. Usually, the compound color material and the chemical color material contain iron, and the lead ore material is easy to sink in the deep layer of the skin, which brings difficulties to the treatment.

(2). The depth of the pattern. In general, the color depth is difficult to remove, the number of treatment is more, the color is shallow, the difficulty is small, and the number of treatment is small. However, the treatment effect is not ideal regardless of the depth of the eyebrow of the chemical color family.

(3). The difference of individual constitution. This includes factors such as age, skin quality, body immunity, and the like.

2. collection of knowledge of eyebrow washing

(1) the difference between the first eyebrow washing and the second eyebrow washing:

When washing eyebrows the second time, use the energy near the focus to wash, that is, the distance is farther than the first time, and the energy is larger than the first time.

(2). The reason why the coffee's brow will return to black and blue:

It's a normal reaction, because the coffee is. The invention relates to a mixed pigment, iron and lead ions. Iron ions are very easy to produce pigmentation in the skin's epidermis, suggesting that it is washed with a wavelength of 1064 nm and then washed with a wavelength of 532 nm. The curative effect was observed after one and a half months, and if the return blue was washed with 1064 nm, the red color was 532 nm.

(3).Why some of the red eyebrows do not react at all:

The color material is chemical color material non-plant color material, iron ion has arrived in the dermis, resulting in pigmentation-so it is more difficult to wash, in this case, the curative effect is not as good as plant color washing effect, for pure red eyebrows, should be washed with 1064nm light first. The energy of the focus of the film breaks the color material, punches out the bleeding point, and then washes it at 532nm wavelength.

(4). how to treat facial plaques:

Liver plaques in the south, such as butterfly spots, are more effective in the treatment of liver plaques, because it is due to the formation of climate, the washing effect of shallow freckles is better, the deep freckles of heredity are better, and the deep freckles of heredity are better. Elderly plaques can be washed with focus, bleeding spots, the general treatment period is three courses of treatment, the interval is 45 days.

(5). treatment of nevi:

Use the focus energy to hit the mole out of the bleeding point.

(6). can “scar physique” be washed:

Very few “scar physique” can be washed, can be tattooed can be washed, but the effect is not as good as normal skin, wash as much as possible with large spots and small energy, do not use focus energy washing.

(7). can pregnant women wash their eyebrows by laser:

Pregnant women can't wash their eyebrows with laser.

How and to what extent the red blood silk is washed:

Red blood, we suggest not to wash, because the blood contains hemoglobin, which absorbs the 532 nm wavelength of light in the course of the treatment, and if it does not diffuse in time, the “Purpura” will be formed, causing the operation to fail.

Taboo of operation:

Taboo use in the following groups

Pregnant women;

Daily work inevitably strong (daily) light exposure to the crowd;

an allergy to the light and an allergy to the light source;

Skin sensitivity is easy to infect allergic people;

Epileptic patients and scar and physique population;

The upper eyelids of the guests and the parts with open wounds;

Diabetic patients;

Operation is being performed after 1-3 months of use of the efficacy-type skin care product and the essential oil is used in the operating site

1-2 days re-operation, black head acne need to be cleared for 3 days and then treated

The expected value is too high to be the operator;

<span style="max-width: 100%;font-size: 20px"><span style="max-width: 100%;font-family: tahoma, geneva, sans-serif"><span style="font-weight: 700 !important"><span style="max-width: 100%"> Notes:</span></span></span></span>

There is a high voltage inside the system, please keep all panels and covers closed.

The treatment handle should be put back in place when not in use.

High intensity pulsed light will be emitted when the treatment head is treated, and the treatment head should be ensured to be directed only to the operating site. (It is recommended that the operator wear special protective glasses) The machine is internally provided with high pressure. Make sure that all the panels are properly covered.

When the device starts, place the treatment head on the hook.

Do not look directly at the treatment of the strong light in the head.

Do not point the treatment head anywhere outside the target area.

When continuous treatment, if you want to adjust down from high energy, be sure to put 3 times 5 times empty gun, in order to prevent the last use of high energy burn customer skin!

<img src="//ae01.alicdn.com/kf/H5f2e49fba1c444b18aa7815903e3d105H.jpg" style="border-style: none;vertical-align: middle;max-width: 100%" /><img src="//ae01.alicdn.com/kf/Hd53bdd4cb82d499a973a4d75773923aca.jpg" style="border-style: none;vertical-align: middle;max-width: 100%" /><img src="//ae01.alicdn.com/kf/H9fbd82649f6f445f831d8c6d8255f954H.jpg" style="border-style: none;vertical-align: middle;max-width: 100%" /><img src="//ae01.alicdn.com/kf/Ha8bae632724a4f70975fa3b8b2ce1ca4p.jpg" style="border-style: none;vertical-align: middle;max-width: 100%" />







<span style="max-width: 100%;font-weight: 700 !important"><span style="max-width: 100%;font-size: 20px"><span data-spm-anchor-id="a2g0o.detail.1000023.i0.190e6af6K16A1q" style="max-width: 100%">About Payment :</span></span></span>
1. We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.
2. Payment must be made within 3 days of order.
3. If you can't checkout immediately after auction close, please wait for a few minutes and retry .
Attention For Russian Friends:
1. Please fill in your full name including your first name, middle name and last name when making the payment;
2. Please fill in your correct address including your Apartment No., Street, City, Region and country.
Otherwise your package would probably be returned!
3. We are not responsible for YOUR MISTAKE.
Shipment:
1. Item will be shipped within 1-3 business days in normal time.
2. Delivery Time:
1)ePacket To USA: 7-15 days
2)China/Hongkong/Singapore/Swiss/Sweden/Netherlans/Estonia Post Air Mail: Around 15-45 working Days,. Diferent country need diferent time.
3)The Shipping time for Russia will be 30-50days or longer due to strict local customs inspection.
4) The Shipping time for Brazil will be 50-100days or longer due to strict local customs inspection.
5) If you choose DHL, Fedex, EMS, UPS the shipping will be faster, usually 7-15 working days
3. If you have not received your shipment within 30 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply.
4. Buyer responses for (in case) all tax or VAT under any circumstances.
Normally we will send by AliExpress Standard Shipping to most of the countries with free shipping. If you want us to send by DHL,UPS etc please contact us, we will give you the cheapest shipping rates.
Return/Refund:
1.If you have a defective goods, you want to return or discount. Please contact us within 3 days after you receive the shipment. All return goods must be returned with its original packaging and accessories. Customer is responsible for shipping charges on returned goods.
2. We will refund the money to you when we get the returned goods. Or replace goods for you.
3. We will deal with the refund in 3 business days when we get the info from you.
Feedback:
We will work with you to until you are satisfied. we sincerely hope that you can leave us a positive Feedback, for any reason you are not satisfied with your purchase, please contact us through (My Messages) or (Ask Seller Questions), Trade manager, before leaving neutral or negative feedback. We will do our best to resolve any problem and satisfy your needs.

Additional information

Brand Name

Dr.aelf

Material

Metal

Place of Origin

China

Type

Tattoo Removal

Function

Skin Tightening

Manufacturing Process

Machine Made

Power Source

AU

Function 1

Skin Tightening

Function 2

Tattoo Removal

Energy

10-2000mj

Power

1000W

AC

50/60HZ

wavelength

1064nm,532nm,1320nm

Repetition rate

1-10hz

Voltage input

100-240V

Reviews

There are no reviews yet.

Be the first to review “2019 Laser Remove Tattoo Eyebrow Removable Tattoo Black Face Doll Eyebrow Machine Q Switched nd Yag Laser Tattoo”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

X
Secured By miniOrange